Server maintenance tips of hard disk content increase database optimization etc
- 2020-05-06 12:04:16
- OfStack
In order to facilitate you in the maintenance of some maintenance content while avoiding errors. The following is a collection of some common sense for the daily maintenance of the server for your reference.
Common knowledge of server maintenance hardware maintenance
Hardware maintenance 1, storage equipment expansion
As resources expand, the server needs more memory and disk capacity to store them. Therefore, memory and hard disk expansion is very common. Before adding memory, it is necessary to determine the compatibility with the original memory of the server, preferably the memory of the same brand specification. If the ECC memory is dedicated to the server, the same memory must be used. Normal SDRAM memory and ECC memory are stored on the same server, which may cause serious errors. Before adding a hard disk, you need to determine whether the server has a spare hard disk holder, hard disk interface, and power interface, and whether the motherboard supports a hard disk of this capacity. In particular, you need to pay attention to prevent the purchase of equipment can not be used.
2. Uninstall and replace
devices
The problem of unloading and replacing equipment is not big. It needs to be noted that there are many brand server cases with special design, which require special tools or organs to open. When unloading the case cover, please read the instructions carefully and do not remove it by force. In addition, this must be done when the power is completely off and the server is well grounded, even on devices that support hot plugging, to prevent static electricity from damaging the device.
Hardware maintenance 3. Dust removal
Dust is the biggest server killer, so you need to dust your servers regularly. For servers, dust can be deadly. The dust removal method is the same as the ordinary PC dust removal method, especially the dust removal of power supply.
Daily server maintenance software maintenance
Daily maintenance of server software maintenance 1. Maintenance of operating system
The operating system is the software foundation on which servers run, and its importance is self-evident. Most server operating systems use Windows 2003 or Windows 2008Server as operating systems and are relatively easy to maintain.
Open the event viewer at Windows NT or Windows 2003 Server to see if there are any special exceptions in the system logs, security logs, and application logs. There are more hackers on the Internet, so you need to go to Microsoft's website to download the latest Service Pack (upgrade package) to install the security holes in time.
Daily maintenance of server software maintenance 2. Maintenance of network services
There are many network services of , such as WWW service, DNS service, DHCP service, SMTP service, FTP service, etc. As the server provides more and more services, the system is also prone to chaos. At this time, it may be necessary to reset the parameters of each service to make it run normally.
3. Database service
After the database running for a long time, the database performance needs to be adjusted to make it into the optimal state. The data in the database is the most important, if these databases are lost, the loss is huge, so you need to back up the database regularly, just in case.
server routine maintenance software maintenance 4. User data
After frequent use of , the server may hold a large amount of data. This data is a very valuable resource, so it needs to be collated and permanently stored on a CD so that it can be recovered even if the server goes down.
Common knowledge of server maintenance hardware maintenance
Hardware maintenance 1, storage equipment expansion
As resources expand, the server needs more memory and disk capacity to store them. Therefore, memory and hard disk expansion is very common. Before adding memory, it is necessary to determine the compatibility with the original memory of the server, preferably the memory of the same brand specification. If the ECC memory is dedicated to the server, the same memory must be used. Normal SDRAM memory and ECC memory are stored on the same server, which may cause serious errors. Before adding a hard disk, you need to determine whether the server has a spare hard disk holder, hard disk interface, and power interface, and whether the motherboard supports a hard disk of this capacity. In particular, you need to pay attention to prevent the purchase of equipment can not be used.
2. Uninstall and replace
devices
The problem of unloading and replacing equipment is not big. It needs to be noted that there are many brand server cases with special design, which require special tools or organs to open. When unloading the case cover, please read the instructions carefully and do not remove it by force. In addition, this must be done when the power is completely off and the server is well grounded, even on devices that support hot plugging, to prevent static electricity from damaging the device.
Hardware maintenance 3. Dust removal
Dust is the biggest server killer, so you need to dust your servers regularly. For servers, dust can be deadly. The dust removal method is the same as the ordinary PC dust removal method, especially the dust removal of power supply.
Daily server maintenance software maintenance
Daily maintenance of server software maintenance 1. Maintenance of operating system
The operating system is the software foundation on which servers run, and its importance is self-evident. Most server operating systems use Windows 2003 or Windows 2008Server as operating systems and are relatively easy to maintain.
Open the event viewer at Windows NT or Windows 2003 Server to see if there are any special exceptions in the system logs, security logs, and application logs. There are more hackers on the Internet, so you need to go to Microsoft's website to download the latest Service Pack (upgrade package) to install the security holes in time.
Daily maintenance of server software maintenance 2. Maintenance of network services
There are many network services of , such as WWW service, DNS service, DHCP service, SMTP service, FTP service, etc. As the server provides more and more services, the system is also prone to chaos. At this time, it may be necessary to reset the parameters of each service to make it run normally.
3. Database service
After the database running for a long time, the database performance needs to be adjusted to make it into the optimal state. The data in the database is the most important, if these databases are lost, the loss is huge, so you need to back up the database regularly, just in case.
server routine maintenance software maintenance 4. User data
After frequent use of , the server may hold a large amount of data. This data is a very valuable resource, so it needs to be collated and permanently stored on a CD so that it can be recovered even if the server goes down.